iFlight Crystal HD Patch 5.8GHz 9dBi Directional Circular
Polarized High Gain Flat Panel FPV Antenna LHCP RP-SMA with Casing for
DJI FPV Goggles
Let's
welcome our new iFlight Crystal HD 5.8GHz Directional Antenna!
Specially designed for the DJI Digital FPV Goggles to replace the stock
front plate with our iFlight engineered Antenna Array. NO, this is not
another patch antenna! Two carefully designed and highly sensitive LHCP
high gain directional antennas give you a better reception at long range
as well as better penetration through trees, bandos or other difficult
terrains. Low profile design to decrease your pack size to a minimum,
and high quality RG178 cables for best durability. We were able to
achieve a super wide antenna beam width through an offset angle of 30
degrees between the two antennas. Horizontal beam of 105° and vertical
beam of 75 degrees at 9dBi gain, dropping of slowly the further you get
to the side! Low loss with a 93% antenna efficiency and a axial ratio of
≤1.6 through the whole band. If that's not enough, we also gave you the
option to either mount your antennas at the bottom or top pair of the
Goggle RP-SMA connectors. Multiple designs available, get them as long
they last!
Description:
Brand: iFlight
Frequency: 5.8GHz
Bandwidth: 5600~5900 Mhz
Gain: 9 dBi
Axial ratio: ≤1.6
Impendance: 50Ω
Radiation Efficiency: 93%
Beam Width: 105° H. 75° V.
Polarization: (LHCP) Left Hand Circularly Polarized
Cable: RG178
Connector: RP-SMA (Fits DJI Goggles directly, not to be used on standard SMA)
Dimensions: 16mm x 7mm x 3mm
Weight: 52.1g
Features:
* 3 designs available, Black Carbon, Blue Sticker Design, Red/Yellow Color Design.
* LHCP high gain directional antenna array
* Lower profile and better reception than stock antennas
* Super wide beam width, horizontal 105° @9dBi, vertical 75° @9dBi
* Can be mounted on top or bottom Goggle RP-SMA pair
Package included:
1 x iFlight Crystal HD Patch 5.8GHz Directional Flat Antenna (not included mushroom antennas)
1 x Outer casing
